Table of Contents
Advertisement
2.0 HDD Installation
This product supports 1 SATA hard drive. Please make sure that the device is powered off
before the installation. The pictures of the installation are for reference only.
1.
Loosen the screws to open the cover.
2. Screw the screws into the HDD but do not tighten them.
3. Place the HDD onto the bottom of the machine.
4. Turn over the machine and secure the HDD with the screws.
5. Connect the power and data cables.
6. Install back the cover and secure it with the screws.
Note: Please check the inside structure of the device and make sure that the cables are
connected well before installing the cover back. Please format the HDD before using.
6
Advertisement
Table of Contents
