DeWalt DXCM024-0393 Instruction Manual

Fig. A Fig. B
Fig. C Fig. D
Fig. E Fig. F
Fig. G Fig. H
VELCRO
STRIP 2
Fig. I Fig. J
11:53
Phone Web
Fig. K Fig. L
11:53 99%
11:53 99% 11:53
AIRLINK™ AIRLINK™
Air Compressor Monitoring System
Air Compressor Monitoring System Air Compressor Monitoring System
AIR COMPRESSOR MAINTENANCE
AIR COMPRESSOR SETTINGS
Unit Nickname:
Serial Number:
Parts Manual #
AIR COMPRESSOR
MONITORING SYSTEM
Parts Manual Rev:
Compressor Model Number:
ADD COMPRESSOR
The following data will populate automatically upon selecting a
a compressor model number from the drop down menu. However,
the values can also be populated manually if you have a different
brand air compressor. Refer to that compressor's manual for
NEED A NEW COMPRESSOR? WE CAN HELP. Maintenance intervals.
VIEW OUR SELECTION GUIDE
ADD NEW
Power Type:
Patent Pending Patent Pending
Fig. M Fig. N
Fig. O Fig. P
11:53 99% 11:53 99%
Air Compressor Monitoring System
Air Compressor Monitoring System
Ex: "6"
Pump Oil Change Interval Months:
Pump Oil Change Interval in Months: Ex: "6
Fastener Torque Interval in Hours: Ex: "200"
Pump Filter Check Interval Hrs: Ex: "50
Fastener Torque Interval in Months: Ex: "12"
Pump Filter Check Interval Months: Ex: "6
Electric Motor Horsepower: Ex: "3.7"
Ex: "200
Fastener Torque Interval in Hours:
0
Compressor Run Hours:
Fastener Torque Interval in Months: Ex: "12
Average Kwh Cost $: Ex: "$0.12"
Electric Motor Horespower: Discovering Ex: "3.7
Tank Drain Notification: On
D E WALT 62:BB -- 36 BC:33:AC:BD:62:BB
Compressor Run Hours: 0
Daily Maintenance Notification: Off
Average Kwh Cost $: Ex:"$0.12
Daily Alert Time
SET DAILY TIME
Tank Drain Noti cation: On
OFF
Daily Maintenance Noti cation: O
PAIR DEVICE
Ex: "200"
SET DAILY TIME Daily Alert Time
PAIR DEVICE
Patent Pending
Dashboard Battery Settings Maintenance Connection
For complete, detailed instructions, download
the User Manual from www.D
200-3207-1021
ENGLISH
WARNING:
must download and read instruction manual
before operating product. This quick start guide
is not a substitute for reading the manual. The
manual contains detailed information and
instructions that the user must be aware of and
follow in order to maintain the product
properly and use it safely.
WARNING:
personal injury and cause damage to the
product and surrounding property. If battery
leakage occurs, thoroughly wash any affected
skin, making sure to keep battery acid away
from eyes, ears, nose and mouth. Immediately
wash any clothing or other surface that comes
in contact with leaked battery acid. If a
chemical burn occurs or if irritation persists,
seek medical attention. Dispose according to
Local, State or Federal regulations.
• Batteries are to be inserted following the
polarity markings on the product.
• NEVER mix old and new batteries or different
brands of batteries. Replace all batteries at the
same time.
• NEVER mix alkaline, standard (carbon-zinc),
rechargeable (nickel-cadmium) batteries with
99% 11:53 99%
this product.
ACMS
ACMS
• NEVER dispose of batteries in fire, as they may
leak and explode.
• Promptly remove exhausted batteries from
Mail Tunes Phone Web Mail Tunes
product.
99% 99%
11:53 • Remove batteries before extended storage.
AIRLINK™
Air Compressor Monitoring System
Pump Oil Change Interval in Months: Ex: "6
Direct
Drive Type:
SETTINGS
Pump Filter Check Interval Hrs: Ex: "50
Ex: "Garage" Ex: "200"
Pump Oil Change Interval in Hours:
Pump Filter Check Interval Months: Ex: "6
Ex: "1234567890" Pump Oil Change Interval in Months: Ex: "6"
Contents
Fastener Torque Interval in Hours: Ex: "200
Ex: "200-3165" Ex: "50"
Pump Oil Change Interval Hrs:
Fastener Torque Interval in Months: Ex: "12
Ex: "A" Ex: "6"
Pump Oil Change Interval Months:
Electric Motor Horespower: Ex: "3.7
Select Ex: "200"
Fastener Torque Interval in Hours:
Compressor Run Hours: 0
Ex: "12" x1 Air Compressor Monitoring Device
Fastener Torque Interval in Months:
Average Kwh Cost $: Ex:"$0.12
Ex: "3.7"
Electric Motor Horsepower:
Tank Drain Noti cation:
On
Compressor Run Hours: 0
OFF
Daily Maintenance Noti cation: On
Electric x3 AA batteries
Average Kwh Cost $: Ex: "$0.12"
Ex: "200"
SET DAILY TIME Daily Alert Time
Patent Pending Patent Pending
x2 Velcro strips (1 hook, 1 loop)
Dashboard Battery Settings Maintenance Connection
x1 Alcohol pad
Power button.
Install Batteries
LED light.
Use a #1 or smaller Phillips screwdriver (not
included) to open and install (3) AA batteries.
Put cover back on and tighten the screws.
Surface Preparations
Use alcohol pad to clean mounting location
11:53 99%
Air Compressor Monitoring System
Pump Oil Change Interval in Months: AIR COMPRESSOR SETTINGS Ex: "6
on the compressor platform and back of the
Pump Filter Check Interval Hrs: Ex: "50
Pump Filter Check Interval Months: Ex: "6
Fastener Torque Interval in Hours: Ex: "200 Air Compressor Monitoring Device.
Fastener Torque Interval in Months: Ex: "12
Electric Motor Horespower: Ex: "3.7
0
Compressor Run Hours:
Average Kwh Cost $: Ex:"$0.12
Secure Velcro Strips
Tank Drain Noti cation: On
Daily Maintenance Noti cation: On
SET DAILY TIME Daily Alert Time
PAIR DEVICE ADD
Attach one velcro strip to back of the Air
Compressor Monitoring Device. Attach other
velcro strip to the compressor.
Surface Installation
WALT.com
E
Mount Air Compressor Monitoring Device
To reduce the risk of injury, user
Battery acid leakage can cause
(Fig. A)
(Fig. B-D)
(Fig. E-F)
(Fig. G-H)
(Fig. I)
Instruction Manual
Guide D'utilisation
Manual de instrucciones
DXCM024-0393
firmly by matching and firmly pressing velcro
pieces together.
Download and Install the APP
On a smart phone or tablet go to Google Play
Store™ or Apple App Store™. When searching
on the app store, 'D WALT Air Compressor
E
Monitoring System' will be listed as text along-
side the icon . Install the App.
Open the APP on Phone
Press Air Compressor Monitoring System App
icon . Then press
ADD COMPRESSOR
Input Compressor Information
Press . Then either select a pre-loaded
ADD NEW
D WALT model number, or enter your own
E
model number, and fill in all the fields.
Turn on the Air Compressor
Monitoring Device
(Fig. M-N)
Once Air Compressor Monitoring Device is on
the compressor, press and hold power button
for 6 seconds. Blue/red LED light flashes when
in pairing mode.
Pair Device
(Fig. O-P)
Press on the App. When the
PAIR DEVICE
"Discovering" button appears, press it.
When the button appears at the bottom
ADD
of the screen, press it. Setup is complete.
Troubleshooting
If no device is found:
• Make sure phone or tablet is within 30 feet
of the Air Compressor Monitoring Device
while pairing.
• Air Compressor Monitoring System Pairing
Mode may have timed out. If LED light
is no longer flashing red/blue, press and
hold power button for 6 seconds to put Air
Compressor Monitoring Device back into
Pairing Mode.
Note: Air Compressor Monitoring Device
should be flashing red/blue if in Pairing Mode
• Make sure there are batteries in the Air
Compressor Monitoring Device.
• Make sure you did not connect the Air
Compressor Monitoring System through the
"Bluetooth" setting on your phone, it must
be connected through the Air Compressor
Monitoring System application only. If your
app and Air Compressor Monitoring Device
stop interacting, check for system updates
on your IOS or Android phone.
• Check Air Compressor Monitoring System
App occasionally for updates to the App.
(Fig. J)
(Fig. J-K)
.
(Fig. L)