Step 2: Adjusting The Picture Position - Sony VPL-HW20A Operating Instructions Manual

Step 2: Adjusting the Picture Position

Project an image on the screen and then adjust the picture position.
4
Lens shift dials
Tip
? 1
(ON/STANDBY), INPUT, MENU, and M/m/</,/
The /
panel of the projector function the same as those on the remote control.
Note
Depending on the installation location of the projector, you may not control it with the remote
control. In this case, point the remote control to the screen instead of the projector.
Remote control
detector
5, 6
Zoom lever,
Focus ring
3
LENS button
Lights in red.
1
ON/STANDBY indicator
(joystick) buttons on the side
1
After connecting the AC cord to
the projector plug the AC cord
into a wall outlet.
The ON/STANDBY indicator lights
in red and the projector goes into
standby mode.
2
? 1
/ (On/
standby)
switch
17