To Connect To Equipment With Component Video Output Connectors - Sony VPL-HW20A Operating Instructions Manual

Notes
• When connecting an HDMI cable to the projector, make sure the
part of the HDMI input of the projector and the
set at the same position.
• If the picture from equipment connected to the projector with an HDMI cable is not
clear, check the settings of the connected equipment.
To connect to equipment with component video output
connectors
Right side of the projector
: Video signal flow
v mark on the connector of the cable is
Component video cable (not supplied)
mark on the upper
V
Speakers
AV amplifier
Equipment with component
video output connectors
23