AEG LAVAMAT 47380 User Information page 28

User information
Symptom
The washing cycle is much
too long
**
The «End» light flashes 4
times and the error code
E40 appears in the display
window
The «End» light** flashes 2
times and the error code
E20 appears in the display
window
The «End» light** flashes 1
time and the error code
E10 appears in the display
window
The «End» light** flashes 10
times and the error code
EA0 appears in the display
window
28
Cause
• the water inlet is blocked,
• there was a power supply failure or the
water was cut off,
• the motor temperature safety device
tripped,
• the water inlet temperature is lower
than normal,
• the foam detection safety system trip-
ped (too much detergent) and the
washing machine evacuated the foam,
• the anti-unbalance mass safety device
tripped, an additional phase was
added to distribute the washing in the
drum better.
• the cover is not correctly closed.
• the drain filter is blocked,
• the drain pipe is blocked or kinked,
• the drain pipe is too high (see «instal-
lation»),
• the drain pump is blocked,
• the installation siphon is blocked.
• the water tap is closed,
• the water network has been cut off.
• the flaps of the drum door are opened.