Related Manuals for AEG LAVAMAT 47380
Summary of Contents for AEG LAVAMAT 47380
- Page 1 LAVAMAT 47380 aqua alarm The environmentally friendly washing machine User information PERFEKT IN FORM UND FUNKTION...
-
Page 2: Table Of Contents
User information CONTENTS Warnings... 4 Usage ... 4 Precautions against frost... 5 Scrapping... 6 Protection of the environment ... 6 Washing machine description... 7 The detergents dispenser... 7 Control panel... 8 Programme selector ... 8 Additional programme pushbuttons ... 10 DELAY START (STARTTIJDKEUZE / DEPART DIFFERE) ... - Page 3 User information Care and cleaning ... 23 Descaling the washing machine... 23 The surface ... 23 The detergents dispenser... 23 The drain filter ... 24 Operating problems... 26 Installation and connection instructions ... 30 Warnings... 30 Washing machine dimensions... 31 Installation ...
-
Page 4: Warnings
User information FOR THE USER Warnings Keep this user’s manual with your washing machine. If you sell your washing machine or give it away, make sure that it is accompanied by its user’s manual. The new user can then be informed of how the washing machine operates and read relevant warnings. -
Page 5: Precautions Against Frost
• Remember to remove all coins, safety pins, boraches, screws, etc., before each wash. They can cause serious damage if they are left in your washing. • Do not put articles in your washing machine if you have used a solvent, alcohol, trichloroethylene, etc., to remove stains from them. -
Page 6: Scrapping
User information Water that remained in the pipes will then be evacuated, thus preventing the formation of frost or ice that can damage your washing machine. The next time you want to use your washing machine, make sure that it is installed in a room in which the temperature is above 0°C. Scrapping All materials marked with the a waste tip (ask for information from your municipal offices) so that... -
Page 7: Washing Machine Description
Washing machine description The detergents dispenser Symbols 1 - prewash 2 - wash 3 - softener (do not exceed the MAX mark) 4 - softener overflow (if overfilled). User information 1 - Control panel 2 - Lid opening handle 3 - Filter door 4 - Leveling screws 5 - Lever for moving the washing machine... -
Page 8: Control Panel
User information Control panel Spin pushbutton/ Additional RINSE HOLD programme pushbuttons Delayed Start pushbutton Start/Pause pushbutton Programme selector It is used to select the most suitable programme to the type and soiling of your laundry. It can be turned to the right or to the left. - Page 9 User information WHITE / COLOUREDS (WITTE/BONTE WAS / BLANC/COULEURS) Main wash for coloured or white laundry from 30°C to 95°C. SYNTHETICS (KREUKHERSTELLEND / SYNTHETIQUES) Main wash for lightly soiled fabrics from 30°C to 60°C. EASY IRONING position (STRIJKVRIJ / SANS REPASSAGE) Wash at 40°C for mixed clothes.
-
Page 10: Additional Programme Pushbuttons
User information Additional programme pushbuttons Additional programme pushbuttons enable to adapt the washing programme to the laundry soil level. It is not necessary to use these options so as to wash normally soiled garments. The use of the different options depends on the chosen programme. -
Page 11: Delay Start (Starttijdkeuze / Depart Differe)
RINSE PLUS (SPOELEN + / RINCAGE +) This option adds two rinses on Cotton, Synthetics and Delicates programs. It is advised for allergic people to detergent products and in areas with fresh water. TIME (TIJD / TEMPS) Shortened wash programme for lightly soiled washing. This function can not be used on the wool and handwash programmes and also with STAIN* pushbutton. -
Page 12: Spinning Speed Pushbutton / Rinse Hold
User information bips. If you want to take away these alarms, because they disturb you, please proceed as follow : a) Choose a washing programme, b) Press simultaneously on the pushbuttons «DELAY START» and «START/PAUSE», c) The acoustic signal is removed. By pressing these two pushbuttons again, the acoustic signal is reactivated. -
Page 13: 0.1. Opening And Closing The Lid
User information LID / DOOR (DEKSEL / COUVERCLE) When the appliance is switched on, the led DEKSEL/COUVERCLE indicates whether the lid can be opened. 0.1. Opening and closing the lid If you want to open the lid when the appliance is switched on, you must set up the appliance in pause position by pressing the START/PAUSE pushbutton. -
Page 14: Consumptions And Programme Durations
User information Consumptions and programme durations Timer / Temperature Washing quantity COTON/LINEN 95 ENERGY SAVING ECO SYNTHETICS 60 DELICATES 30 WOOL / SILK 30 *Programme setting for testing in accordance with standard EN 60456. Values given in the above table are provided as a guide and may vary depending on the water supply temperature and pressure, and your electricity power supply mains voltage. -
Page 15: Washing Guide
Washing guide Sorting and preparing your washing • Sort the washing by type and care symbol (see chapter 5.4: Inter- national symbols for care of textiles): normal wash for strong washing that can resist energetic wash and spin; delicate wash for delicate washing that should be treated more carefully. -
Page 16: Detergents And Additives
User information • about one third full for very delicate articles such as net curtains and wool. For a mixed wash, fill the drum as required for the most delicate material. Detergents and additives Only use detergents and additives suitable for use in a washing machine. -
Page 17: International Symbols
User information International symbols... -
Page 18: How To Do A Wash
User information How to do a wash ? Before the first wash in your washing machine, we recommend that you should do a preliminary wash at 90°C with detergent but without any washing to clean the tub. Loading the washing •... -
Page 19: Selecting The Spinning Speed
User information The OFF position of the programme selector switchs off the appliance (it is switched on for all other positions). This function enables also to cancel a programme and to restart the washing machine in case of error. If the programme selector is turned when the appliance is performing wash cycle, the programme will be carried out and will ignore the new position of the selector. -
Page 20: End Of Programme
User information tinuously. It is normal that the program selector does not turn during the cycle. The current program light is on. If you selected a delayed start, the countdown will begin. The "Remaining time" display window displays either the program duration or the displayed start time. -
Page 21: Programmes Tables
Programmes tables Washing This table does not include all possibilities, simply the best and most usual adjustments in practice. Washing Max. type washing quantity Washing to 5 kg be boiled Cotton / 4,5 kg Coloureds 5,0 kg Easy care 2,5 kg washing 1,0 kg Delicates... -
Page 22: Separate Rinse
User information Separate rinse Washing type Washing to be boiled Coloureds Easy care washing Delicate washing Wool / Handwash Separate spinning Washing type Washing to be boiled Coloureds Easy care washing Delicate washing Wool / Handwash Max. washing quan- tity (dry weight) 5,0 kg 2,5 kg 2,5 kg / 1,0 kg... -
Page 23: Care And Cleaning
Care and cleaning Do not do any cleaning operation until you have unplugged the washing machine. Descaling the washing machine Normally there is no need to descale the washing machine if the detergent was correctly proportioned. If descaling is necessary, use a special non-corrosive product specially designed for washing machines that you can find in the shops. -
Page 24: The Drain Filter
User information Reassembly : The drain filter Clean the filter at the bottom of the washing machine regularly. The "filter" light comes on if the filter is blocked. In this case clean it immediately. If you wash washing that is very fluffy, clean it after each wash. - Page 25 Drain residual water: Put a receptacle under the drain. Turn the cap in the anti-clockwise direction until it is vertical to release residual water. Remove the filter: Unscrew the cap all the way and take it off. Clean it tho-roughly with running water. Put the assembly back and screw it in the clockwise direction.
-
Page 26: Operating Problems
User information Operating problems Many checks have been carried out during the manufacture of your washing machine. However, if you face a problem with its operation, please read the following sections before calling the After Sales service. Symptom The washing machine will not start or will not fill The washing machine fills up but empties again... - Page 27 Symptom Cause There is water on the floor • excess detergent has made too much around washing machine • the detergent is not suitable for • the drain siphon is not hooked on pro- • the drain filter was not put back into •...
- Page 28 User information Symptom The washing cycle is much too long The «End» light flashes 4 times and the error code E40 appears in the display window The «End» light** flashes 2 times and the error code E20 appears in the display window The «End»...
- Page 29 Symptom The «End» light** flashes 15 times, the error code EF0 appears in the display window Softener or Javel water flows through overflow orifice when filling* *depending on model. ** Eliminate the causes of the failure if you find them, and then press on the «Start/Pause»...
-
Page 30: Installation And Connection Instructions
User information FOR THE INSTALLER Installation and connection instructions Warnings • This washing machine is heavy. Take care when moving it. • You must remove the packing on the washing machine before use. Failure to remove all transport protection devices can cause damage to the washing machine or nearby furniture. -
Page 31: Washing Machine Dimensions
Installation Unpacking Packing used to protect internal parts of the washing machine during transport must be removed before the washing machine is put into service for the first time. Remove all packing from the washing machine. Tilt the washing machine sideways and then remove the packing under the motor, and straighten the washing machine. - Page 32 User information You can now see the openings that must be closed with the caches in the pack attached to the washing machine; do not forget to fold down the central capsule. Make sure that you have removed all these parts from your washing machine and keep them so that you can use them again if you need them for future transport.
- Page 33 Leveling Precise leveling will prevent vibrations, noise and movements of the washing machine during operation. Make the washing machine level by adjusting the leveling screw that is too short. Unscrew the stand and locking collar assembly (lift the washing machine if necessary). When the washing machine is stable, maintain the stand on the ground and turn the locking collar as far as possible.
- Page 34 User information Drain The drain siphon must be placed inside a drain pipe (or in a washbasin) at a height of between 70 and 100 cm. Make sur that it cannot fall. Secure the outlet / sink outlet joint with a hose band clip (available from your dealer).
-
Page 35: Technical Characteristics
This washing machine complies with CEE directive 89-336 about the limitation of radioelectric disturbances and directive CEE 73-23 for electrical safety. Garantee conditions and After Sales Service Please contact our AEG agents’ of the country directly. User information Height 850 mm Width... - Page 36 AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http: //www.aeg.hausgeraete.de Copyright by AEG 146 6334 00 - 04/04...