End Of Programme - AEG LAVAMAT 47380 User Information

User information
tinuously. It is normal that the program selector does not turn during
the cycle.
The current program light is on.
If you selected a delayed start, the countdown will begin. The
"Remaining time" display window displays either the program duration
or the displayed start time.

End of programme

The appliance is equipped with a security which prevents the opening
of the lid during the cycle. The washing machine stops automatically.
"0" flashes in the display window. You will hear a double "click" in the
locking device. When the DOOR light illumintates, you can open the lid.
The programmes end :
• by a spinning (for all washing programmes) if you have not selec-
ted the option RINSE HOLD
• by a rinse hold (for all washing programmes) if you have selected
the option RINSE HOLD. You can then end these programmes by a
spinning or by a draining by setting the programme selector on the
chosen programme by the OFF position, then pushing the START/
PAUSE pushbutton.
At the end of the cycle, place the programme selector on the OFF
position in order to switch off the appliance.
Remove the laundry. Unplug the appliance and switch off the water
inlet tap.
Check that the drum is empty : any garments left in the appliance may
be damaged during the next wash (shrinkage) or their colour may run
onto other garments.
Note : leave the lid opened in order to air the washing machine.
20