List Of Options; Data Code Designation - Omron V700 Series Operation Manual

Command and Response Frame Structure

5-3-2 List of Options

Symbol
ST Single
Trigger
SA Single Auto
SR Single
Repeat
FT FIFO Trigger
FA FIFO Auto
FR FIFO Repeat Waits for an ID Tag to approach and communicates with the ID Tags one at a time as
ME Multi-trigger
MR Multi-repeat
Lj Selective
(j: * or 0 to F)
Access
QT Quick
(See note 1.) Trigger
QA Quick Auto
(See note 1.)
QR Quick
(See note 1.) Repeat

5-3-3 Data Code Designation

ASCII Code Designation
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
74
The following nine options can be specified in commands. There are four com-
mands (READ, WRITE, ADD, and SUBTRACT) that can use all of the options.
Name
Communicates with the one ID Tag in the Antenna's communications area.
Waits for an ID Tag to approach and communicates with that one ID Tag in the
Antenna's communications area.
Waits for an ID Tag to approach and communicates with that one ID Tag in the
Antenna's communications area. The Controller waits and communicates with other
Tags as they reach the Antenna's communications area.
Communicates with ID Tags one at a time as they enter the Antenna's
communications area.
Waits for an ID Tag to approach and communicates with the ID Tags one at a time as
they enter the Antenna's communications area.
they enter the Antenna's communications area. The Controller waits and
communicates with other Tags as they reach the Antenna's communications area.
Communicates with all the Tags within the communications area of the Antenna.
Sends a "communications completed" response after communicating with all of the ID
Tags.
Communicates with all the Tags within the communications area of the Antenna.
Communicates with new ID Tags as they enter the Antenna's communications area.
Communicates with a particular ID Tag out of the multiple ID Tags within the
communications area of the Antenna.
Communicates at high-speed with the one ID Tag in the Antenna's communications
area.
Waits for an ID Tag to approach and communicates at high-speed with that one ID Tag
in the Antenna's communications area.
Waits for an ID Tag to approach and communicates at high-speed with that one ID Tag
in the Antenna's communications area. The Controller waits and communicates at
high-speed with other Tags as they reach the Antenna's communications area.
Note 1. The QT, QA, and QR commands can be used with the V700-Dj3Pj1-Y ID
Tags only.
2. Do not set the Controller to energy-saving mode if the single repeat, FIFO
trigger, FIFO auto, FIFO repeat, or multi-repeat options are used, otherwise
a command error will result. The Controller must be set to energy-saving
mode when using the selective access function.
Specify in the command whether read or write data is handled as ASCII text data
or handled as hexadecimal numeric data.
Data of one character uses a single byte (or a single address) in ASCII or JIS8 in
the memory of the ID Tag.
Description
Section 5-3