Table of Contents
Advertisement
Available languages
Available languages
Menu item
BRIGHTNESS
SCROLL *
TAG DISPLAY
PRO EQ
FADER *
BALANCE *
LOUD
VOL ADJUST
L/O MODE
SUB.W LPF *
SUB.W LEVEL *
HPF
BEEP
AMP GAIN *
*
2
Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*
3
If you are using a two-speaker system, set the fader level to <00>.
*
4
This adjustment will not affect the subwoofer output.
*
5
Displayed only when <L/O MODE> is set to <SUB.W>.
*
6
The volume level automatically changes to "VOLUME 30" if you change to <LOW POWER> with the volume
level set higher than "VOLUME 30."
22
ENGLISH
DAY [ 31 ] / NIGHT [ 15 ] : Customizes the display and button illumination
brightness level [ 00 — 31 ] for day and night.
2
ONCE : Scrolls the displayed information once. / AUTO : Repeats scrolling (at
5-second intervals). / OFF : Cancels.
(Pressing DISP for more than one second can scroll the display regardless of the
setting.)
ON : Shows the Tag information while playing MP3/WMA/WAV tracks. /
OFF : Cancels.
For settings, see page 20.
3,
*
4
R06 — F06 [ 00 ] : Adjusts the front and rear speaker output balance.
4
L06 — R06 [ 00 ] : Adjusts the left and right speaker output balance.
ON : Boost low and high frequencies to produce a well-balanced sound at a low
volume level. / OFF : Cancels.
–05 — +05 [ 00 ] : Presets the volume adjustment level of each source (except
"FM"), compared to the FM volume level. The volume level will automatically increase
or decrease when you change the source. Before adjustment, select the source you want
to adjust. ("VOL ADJ FIX" appears on the display if "FM" is selected as the source.)
SUB.W : Selects if the REAR/SW terminals are used for connecting a subwoofer
(through an external amplifier). / REAR : Selects if the REAR/SW terminals are used for
connecting the speakers (through an external amplifier).
5
LOW 55Hz / MID 85Hz / HIGH 120Hz : Frequencies lower than 55 Hz/ 85 Hz/
120 Hz are sent to the subwoofer. / LPF OFF : Deactivates (all signals are sent to the
front/rear speakers).
5
00 — 08 [ 04 ] : Adjusts the subwoofer output level.
LOW 62Hz / MID 95Hz / HIGH 135Hz : Activates the High Pass Filter.
Frequencies lower than 62 Hz/ 95 Hz/ 135 Hz are cut off from the front/rear speakers. /
OFF : Deactivates (all signals are sent to the front/rear speakers).
ON / OFF : Activates or deactivates the keypress tone.
6
LOW POWER : VOLUME 00 – VOLUME 30 (Selects if the maximum power
of each speaker is less than 50 W to prevent damaging the speakers.) /
HIGH POWER : VOLUME 00 – VOLUME 50
Selectable setting, [ Initial: Underlined ]
Advertisement
Table of Contents
