Table of Contents
Advertisement
Original issue
Service Manual
Oct.2012
Page 16/41
Model
5. Needle threader height --continued--
One Plus
Remove screw (K) and outer pipe (J). Pull down the threading lever to its
lowest position. Check and see if hook protrudes approx. 1.5mm from needle.
K
J
approx.1.5mm
Loosen nut (F) under threader support shaft and turn hook portion (G) in either
way for adjustment. Tighten the nut (F) securely after adjustment.
G
G
F
F
Reassemble outer pipe (J) to correct position.
Advertisement
Table of Contents
