Table of Contents
Advertisement
Refuelling
Only refuel the machine with the engine switched off. Do not
refuel the machine in enclosed areas.
Avoid naked flames, no smoking. Avoid fuel spillage.
Collect spilt fuel in a suitable container and prevent spillage enter-
ing the soil.
Do not inhale petrol fumes.
Maintenance
Only qualified and authorised persons may carry out maintenance
work.
Keep unauthorised persons away from the machine.
Never carry out maintenance work with the engine running. Park
the machine on a level, firm surface.
Working on the fuel system
Avoid naked flames, no smoking, avoid fuel spillage. Collect spilt
fuel in a suitable container and prevent spillage entering the soil.
Dispose of spilt fuel in an environmentally acceptable manner.
Do not inhale petrol fumes.
Working on the engine
When working on the air filter, no dirt must fall into the air duct.
Do not work on the exhaust when hot; risk of burns!
When working on the engine exhaust port, no combustion resi-
dues must fall into the cylinder.
Do not touch the piston with cleaning tools.
Working on the tamping plate
Wipe off any excess oil, collect spilt oil in a suitable container and
dispose of in an environmentally acceptable manner.
Keep oily materials in a specially marked container and dispose of
in an environmentally acceptable manner.
Cleaning
Never clean the machine with the engine running.
Never use petroleum spirit or other flammable materials for clean-
ing purposes.
When using pressure cleaning equipment, do aim the jet directly
at electrical parts and insulating material or cover these before-
hand.
Do not place the water jet directly in the air filter, exhaust or air
intake port.
After completing maintenance work
Refit all protective devices on completing maintenance work.
Repair
Only qualified and authorised persons may carry out repairs.
Exhaust gases are dangerous! When starting the machine in en-
closed areas, sufficient ventilation must be ensured!
If the machine should break down, hang a warning sign on the
control arm.
Testing
Road rollers, trench rollers and vibrating plates and tampers must
be tested for safety depending on the operating conditions as
required,however at least once a year by an expert.
SAFETY
Disposal of the machine after finish of its service life
At disposal of the machine after finish of its service life, the owner
is obliged to comply with national regulations and laws on wastes
and protection of environment. Therefore we recommend in such
cases to contact the following:
• professional specialized companies engaged in such activities
and having the relevant certificate.
• the manufacturers or contracting service organizations autho-
rized by him.
The manufacturer is not responsible for damages to health of
owners neither for damages to the environment in events of failing
to comply with above mentioned hygienic and ecological priciples.
SRA User Manual ◄ 7
Advertisement
Table of Contents
