Table of Contents
Advertisement
Operation
Guide the machine only with the guide bar, and
don't lift it during operation.
Always keep an eye on the machine when its
Danger
motor is running.
• The operator's position is in the forward direction behind
the machine.
• Set the throttle (5) to «MAX»; the machine works at its
highest frequency.
If the motor oil is too low, the motor won't start.
The dumping height of the material to be com
pressed should not be higher than the vibrating
Important
tamper can drive over.
• To get uniform operating performance, throttle lever
should be at max position.
Rate of Advance
14 ► SRA User Manual
OPERATION
• The rate of advance can be influenced in two ways:
- By changing the tilt:
Forward tilt
Rearward tilt
- By putting weight on the guide bar:
No weight
Heavy weight
= forward quickly
= forward slowly
= forward slowly
= forward quickly
Advertisement
Table of Contents
