Table of Contents
Advertisement
Shutting off the motor
In emergency situations, turn the motor switch
to «OFF» to shut off the motor.
Important
• Set the throttle lever (5) to «MIN».
• Turn the motor switch (6) to «OFF».
• Set the fuel tap (3) to «OFF».
OPERATION
Working with the tamper
Setting the working height
Setting the guide bar out of the optimal position
can increase hand/arm vibration. This must be
considered when determining the exposure period.
Attention
• Loosen the screws (1) enough so that the bracket moves
up and down. Do not take them completely out.
• Set the working height by turning the guide bar (2).
• Tighten the screws (1).
• To set the ergonomically optimal position
- Loosen the screws (1),
- Set the markers above one another.
- Tighten the screws (1).
SRA User Manual ◄ 13
Advertisement
Table of Contents
