Table of Contents
Advertisement
4. Select the setting you want to edit,
setting,
.
YES
5. Repeat step 4 for other settings you want to edit.
Preferred service
You can set GPRS or GSM as the preferred service.
Note: To see the status of GPRS coverage and
connection, in standby, look at the triangle above the
signal strength indicator. If the triangle is filled
GPRS is available, otherwise it is not.
To select preferred mode
Scroll to Connectivity,
service,
, and select GPRS and GSM or GSM
YES
only.
WAP profile settings
The WAP settings are stored in a WAP profile.
In most cases you only need to use one profile to
access the Internet.
You set up and use additional WAP profiles, for
example, when accessing secure Internet sites, such
as a banking site or a corporate intranet. You then
simply switch between profiles when you need to
change the network connection.
This is the Internet version of the user's guide. © Print only for private use.
. Edit the
YES
, Data comm.,
, Pref.
YES
YES
To enter WAP profile settings manually
1. Make sure you have a data account set up between
your phone and the Internet server, as described in
"Data account settings" on page 47.
2. Scroll to WAP services,
profiles,
.
YES
3. Select Add profile? to add a new profile or select an
existing profile that you want to edit,
To enter information in a new profile
When selecting Add profile? enter a name for the
profile,
, Connect using:,
YES
account to be used,
YES
. A list appears. Scroll to Save?,
YES
To edit an existing profile
When selecting an existing profile, you can do the
following:
• Rename – Change the name of the profile.
• Connect using – Select data account.
• IP address – WAP gateway server address.
• Advanced – More profile settings, see below.
• Delete – Remove the profile.
, Options,
, WAP
YES
YES
.
YES
, select the data
YES
and enter the IP address:,
.
YES
Setting up WAP
49
Advertisement
Table of Contents
