Daewoo Lanos 2002 Owner's Manual page 94

Fader Control :
Fader control is used to adjust the volume
of the front and rear speakers.
1. Select the fader control mode using the
audio mode selector knob (17).
2. When "FAD" indicator appears on the
V.F.D., rotate volume control knob (1)
clockwise to decrease the volume of
rear speakers. The fader level signal will
change from "F1" up to "F15".
3. To decrease the volume of the front
speakers, rotate volume control knob
(1) counterclockwise.
The fader level signal will change from
"R1" up to "R15".
4. When the fader level signal "0" appears
on the V.F.D., the equivalent volume of
front and rear speakers is heard.
5. After adjusting, the signal will return to
the original condition 5 seconds later.
AUDIO SYSTEM* (RADIO, CASSETTE AND CD PLAYER) 5–31
Sound Style (EQ) :
• Select one of the pre-defined sound
style
• Classic
• Pop
• Rock
• Jazz
• Spoken voice (Voice)
• These styles correspond with certain
range of audio frequencies.
• Each EQ mode is not compatible with
Treble or Bass.
Mute :
• Mute(silence) the set on cancel the
mute.
Balance Control :
In balance control condition, turn this knob
clockwise to raise the right speaker volume,
counterclockwise to raise the left speaker
volume.
"BAL" and "L (or R)" indicators will be illu-
minated and balance condition will appear as
bar-signal on the V.F.D.
When the center solid line appears, the
equivalent volume of right and left speakers
is heard.
After 5 seconds, the balance condition indi-
cator will be changed to the volume condi-
tion indicator.