Craftsman 247.299.341 Operator's Manual page 13

and cotter pin. See Figure 12.
Wheel
Yoke Back
Attach the wheel yoke so that the wheels are toward the rear (closest
to depth stake) for deep tilling and cultivating by removing the clevis
pin and cotter pin. See Figure 13.
OPERATION
Wheel Yoke
Figure 12
Wheel Yoke
Wheel
Figure 13
Depth Stake
The depth stake acts as a brake for the tiller and controls the depth
and speed at which the machine will operate. Remove the clevis pin
and hairpin clip to raise or lower the depth stake. See Figure 14.
ADJUSTING THE HANDLE HEIGHT
The handle should be adjusted so that when the tiller is digging 3-4"
into the soil, the handle falls to about waste-high. To adjust handle,
simply loosen the handle knob, move the handle to the desired height
and retighten the handle knob. See Figure 15.
13
Depth Stake
Figure 14
Handle Knob
Figure 15