Unit Installation; Tools Required - ADTRAN NetVanta 900 Series Hardware Installation Manual

NetVanta 950 IAD Hardware Installation Guide

UNIT INSTALLATION

The installation, maintenance, and service of the NetVanta 950 IAD System is intended to be carried out by
qualified personnel only. The instructions and guidelines provided in this section cover hardware
installation topics such as wall mounting/rack mounting the unit and installing modules. These instructions
are presented as follows:
• Mounting Options on page 26
• Wall mounting the NetVanta 950 on page 26
• Rack mounting the NetVanta 950 on page 27
• Installing Modules on page 28
• Battery Backup Unit on page 29
For information on configuring a specific application, refer to the quick configuration documents provided
on your Adtran OS Documentation CD. For details on the command line interface, refer to the Command
Reference Guide (also included on your CD).
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
The NetVanta 950 IAD system is intended to be installed, maintained, and serviced
by qualified personnel only.

Tools Required

The customer-provided tools required for the hardware installation of the NetVanta 950 are:
• Ethernet cable
• Phillips-head screwdriver
• Drill (wallmounting only)
• Flat-head screwdriver (wallmounting only)
To access the Web GUI of the NetVanta 950, you will need a PC with a web browser and a
network connection. Instructions on how to access the Web GUI are in the NetVanta 950
Quick Configuration Guide (provided on the Adtran OS Documentation CD).
To access the command line interface (CLI) of the NetVanta 950, you will also need a
VT100 terminal or PC with terminal emulation software and a console port cable.
Instructions on how to access the CLI are given in the Command Reference Guide
(provided on the Adtran OS Documentation CD).
61200788L1-34B © 2004 ADTRAN, Inc.

Unit Installation

25