Useful Features; Linking With A Phone; Getting Ready; Auto Time Adjustment - Casio 5686 Operation Manual

Useful Features

Pairing the watch with your phone makes a
number of the watch's features easier to use.

Auto time adjustment

Auto Time Adjustment
l
Selection of More Than 300 World Time
cities
Configuring World Time Settings
l
Stopwatch Data Transfer to the Phone
Viewing Stopwatch Data
l
In addition, a number of other watch settings
can be configured using your phone.
To transfer data to a watch and to
configure settings, you first need to pair
the watch with your phone.

Getting Ready

l
Your phone needs to have the CASIO
●
"CASIO WATCHES" app installed to pair
with the watch.
Watch Operation Guide 5686

Linking with a Phone

While there is a Bluetooth connection
between the watch and phone (Mobile Link),
the watch's current time setting is adjusted
automatically. You can also change the
watch's other settings.
Note
This function is available only while
●
CASIO WATCHES is running on the
phone.
This section describes watch and
●
phone operations.
: Watch operation
X
: Phone operation
Y
Getting Ready
To use your watch in combination with a
phone, you first need to pair them. Perform the
steps below to pair the watch with a phone.
Install the app on your phone.
●
A
In Google Play or the App Store, search for the
CASIO "CASIO WATCHES" app and install it
on your phone.
Configure Bluetooth settings.
●
B
Enable the phone's Bluetooth.
Note
For details about setting procedures,
●
see your phone documentation.
Pair the watch with a phone.
● C
Before you can use the watch in combination
with a phone, you first need to pair them.
1.
Move the phone to be paired with close to
(within one meter of) the watch.
2. Y
Tap the "CASIO WATCHES" icon.
Tap
●
select the applicable product name.
3. X
Hold down (D) for at least two seconds.
Release the button when [CNCT]
changes from high speed flashing to slow
flashing.
on the "My Watch" tab. Next,
4. Y
Perform the operation shown on the
screen of the phone to be paired with.
[OK] is shown on the display while there
is a connection between the watch and
phone.
If pairing fails for some reason, [ERR]
●
appears on the display momentarily
and then the watch returns to the
Timekeeping Mode. Perform the pairing
procedure again from the beginning.
Pairing started. Pairing complete.
Note
The first time you start up CASIO
●
WATCHES, a message will appear on
your phone asking if you want to
enable location information
acquisition. Configure settings to allow
background use of location
information.
Auto Time Adjustment
Your watch can connect with your phone to
adjust the watch's time setting.
If you leave your watch in the Timekeeping
Mode, it will perform the adjustment operation
automatically as you go about your daily life,
without any operation required by you.
9