Table of Contents
Advertisement
COMPLX CMP:
Complex Component
W FLMPRF:
Wirewound Flameproof
C.B.A.:
Circuit Board Assembly
P.C.B.:
Printed Circuit Board
E.S.D.:
Electrostatically Sensitive Devices
3. When replacing 0
4. Since the UHF/VHF TUNER/TV DEMODULATOR UNIT (Ref. No.
743) has already been pre-adjusted at the factory, do not try to
adjust the UHF/VHF TUNER/TV DEMODULATOR UNIT. The UHF/
VHF TUNER/TV DEMODULATOR UNIT replacement part is
available as a complete assembly unit only.
5. EEP ROM IC (IC6005), MAIN C.B.A. replacement note:
After replacing EEP ROM IC (IC6005) or MAIN C.B.A., be sure to
perform the "PG SHIFTER ADJUSTMENT" in ELECTRICAL
ADJUSTMENT procedures.
6. R6210 and C6202 replacement note:
Early units use a Main C.B.A. with suffix version number LSJB2080
-1 or LSJB2080-2 which employs two different methods as shown
below.
When replacing R6210 or C6202 on Main C.B.A. with suffix version
number LSJB2080-1 or LSJB2080-2, order the RESISTOR KIT
(LSUC0015), then replace both R6210 and C6202 at the same time
as shown in Fig.2.
The RESISTOR KIT (LSUC0015) consists of R6210
resistor, a wire can be substituted for it.
57
Advertisement
Table of Contents
