Panasonic NV-SJ4140PN Service Manual page 26

SERVICE NOTES.
5.2.5. Capstan Belt, Support Angle, Intermediate Gear B, and Main Cam Gear
5.2.5.1. Reassembly Notes
1. Alignment of Main Cam Gear, Drive Rack Arm, and Main Rod
A. Confirm that the hole on Main Rod is a Through Hole with a
hole on chassis.
B. Confirm that the hole on Drive Rack Arm is a Through Hole with
a hole on chassis.
C. Install the Main Cam Gear so that the projection of Main Cam
Gear is in the upward position as shown.
Fig. J3-1
Fig. J3-2
26