Table of Contents
Advertisement
Table 2: Indication of DVD self-check (*7)
INDICATION
OK
NOT FOUND
CABLE ERROR
Table 3: Indication of HDD self-check (*8)
INDICATION
OK
NOT FOUND
CABLE ERROR
Table 4: Available button in self-check mode
BUTTON
ENTER (*9)
POWER (*10)
OTHER
5. When the self-check mode is complete, press [POWER] button to turn the power off.
When initializing the DVD/VCR with HDD recorder, press [ENTER] button. Fig. c appears on the screen. After
two seconds, the power is turned off automatically.
Table 5: Description of *11 in Fig. c
INDICATION
ENTER
WRITING
OK
NG
NOTE: When initializing, "Current Clock", "Setup Changing Item", "Channel Setup", "Area Setup", "Program" and
"HDD Contents" are initialized.
Connection of DVD is normal.
DVD drive cannot be found.
FFC cable (connecting to CN401) between the DVD drive and the DVD/HDD Main CBA is
not connected correctly.
Connection of HDD is normal.
HDD drive cannot be found.
FFC cable between the ATA CBA and the HDD drive is not connected correctly.
Initialize (only when the self-check mode is complete)
Turn the power off (when the self-check mode is complete)
Not available
" ******* " differs depending on the models.
Self-Analysys and Report
DVD CONNECT STATUS :
HDD CONNECT STATUS :
HDD POWER ON HOURS :
BE Ver. :
FE Ver. :
Sub Micon Ver. :
FACTORY DEFAULT :
Fig. c: Initialize Mode Screen
Initialization preparation is complete.
Initializing
Initializing is finished normally.
Initializing is not finished normally.
DESCRIPTION
DESCRIPTION
DESCRIPTION
OK
OK
100(40)
T2*******Q2J
R20_0**_***h
NFQ2***T1-3N11
WRITING
*11
DESCRIPTION
1-9-2
E4340INT
Advertisement
Table of Contents
