Yamaha RCX340 User Manual page 25

SO monitor
■
Name on/off
Save name Reload name
Name on/off
Save name
Reload name
Check name
ON/OFF button
Name entry field
c
CAUTION
• In order to switch SO or DO on/off, the programming box must release control authority, and the controller must
be in auto mode.
• SO00-07, SO10-17, DO00-07, and DO10-17 are dedicated bit outputs that indicate the status of the controller,
and therefore cannot be changed.
SOW monitor
■
Display unit
Display unit
Tip
The SOW2-15 output values can be updated to desired values by rewriting the numerical value in the text box
during communication with the controller.
As SOW0 and 1 are dedicated outputs, their values cannot be changed.
As SIW is an external input value, it cannot be changed to an arbitrary value.
ON/OFF button
I/O name entry field
Check name
Shows/hides the name.
Sends the name that is entered in the name entry field to the controller.
Loads the name from the controller, updating the indication of the name entry field.
Checks whether the entered I/O name conforms to the prescribed rules.
Switches the bit output on/off.
However since SO00-07 and SO10-17 are dedicated bit outputs that indicate the status of the controller,
they cannot be switched on/off. Similarly, DO output (DO00-07 and DO10-17) cannot be switched on/off.
Enters the I/O name.
However since SO00-07 and SO10-17 are dedicated bit outputs that indicate the status of the controller,
name entry is not possible. Similarly, DO output (DO00-07 and DO10-17) does not allow name entry.
For details on the rules for I/O names, refer to "I/O name entry field" in the preceding "■ SI monitor
(Detail screen)."
Displays port values in hexadecimal or decimal.
If the name is hidden
Name on/off
Function
Function
ON/OFF button
21
9