Sony PDW-F355L Operating Instructions Manual page 168

Status WARNING
display on indicator
the LCD
monitor/
viewfinder
screen
Warning
: Continuous
indication
: 1 flash/s
: 4 flashes/s
DISC
4)
4)
FULL!
MAX # Clips
4)
LOW BATT!
2)
BATT
EMPTY!
High TEMP!
ACC Sensor!
Skew Sensor
1) Asterisks (*) are replaced by digits in the display.
2) During recording
3) During playback, fast forward, fast reverse, or stop
4) During recording pause
5) During recording or pause
For details about the warning displays and alarm
messages on the viewfinder, see the next item.
Operation/alarm messages
An operation or alarm message is displayed in the
operation/alarm message display area (see page 27) of the
viewfinder screen.
Operation/alarm
message
INTERVAL **M**S
LOW LIGHT
HIGH TEMPERATURE Indicates that temperatures have
168
Operation Warnings
Warning Indicators in the
sound viewfinder
Continuous REC/
beep TALLY
: Continuous
1 beep/s
: 1 flash/s
4 beeps/s
4)
4)
5)
Meaning
Indicates the camera is in the
Interval Rec mode. **M**S
indicates the shooting interval.
Appears, depending on the
setting, to indicate the subject
illumination is inadequate.
risen inside the unit. Avoid
continued use in this state.
Problem
BATT
: 4 flashes/s
4) – Disc full.
4) – The upper
limit of 300
recorded clips
has been
reached.
Battery almost
5)
exhausted.
Battery
exhausted.
– Internal
temperature
high.
– Internal drive
sensor error
A message for VDR operation is displayed in the setting
change and adjustment progress message display area of
the viewfinder screen (see page 28).
Message
ILL. Disc!
ILL. Index!
No FS!
Unknown FS!
No Support!
FORMAT NG!
Disc Damage
Non AV Full
MAX # Files
DI read err
Read err
DRV ADJ err
VDR operation Action to take
Recording stops. Change the disc.
Cannot record. Change the disc.
Operation Change the battery.
continues.
Operation stops. Change the battery.
Operation Power the unit off
continues. and move it to a
cool place.
Operation Protect the unit
continues. from shock and
vibrations, turn off
the power, and
contact your Sony
dealer.
Meaning and action to take
The disc cannot be used by this
unit. Insert another Professional
Disc.
Index file or file system error.
Exchange or format the disc.
A recorded clip cannot be handled
by this unit. Exchange or format
the disc.
The disc cannot be used by this
unit. Exchange the disc.
The disc cannot be recorded. To
record, exchange the disc.
The disc is full. Exchange or
format the disc.
The disc was not recognized. Try
ejecting the disc and inserting it
again. Or exchange the disc.