Audio Dubbing - Sony digital handycam DCR-TRV10 Operating Instructions Manual

Audio dubbing

You can record an audio sound to add to the original sound on a tape by connecting
audio equipment or a microphone. If you connect the audio equipment, you can add
sound to your recorded tape by specifying starting and ending points. The original
sound will not be erased.
Use the Remote Commander for this operation.
Connecting the microphone with the MIC jack
MIC
(PLUG IN
POWER)
: Signal flow
You can check the recorded picture and sound by connecting the AUDIO/VIDEO jack
to a TV.
The recorded sound is not output from a speaker. Check the sound by using the TV or
headphones.
Connecting the microphone with the intelligent accessory shoe
Microphone (not supplied)
Microphone (not supplied)
61