Searching A Recording By Date - Date Search - Sony digital handycam DCR-TRV10 Operating Instructions Manual

Searching a recording by date
– Date search
You can automatically search for the point where the recording date changes and start
playback from that point (Date search). Use a tape with cassette memory for
convenience. You can do this with the Remote Commander.
Use this function to check where recording dates change or to edit the tape at each
recording date.
Searching for the date by using cassette memory
You can use this function only when playing back a tape with cassette memory (p. 109).
(1) Set the POWER switch to VTR.
(2) Set CM SEARCH in
ON.
(3) Press SEARCH MODE repeatedly, until the date search indicator appears.
The indicator changes as follows:
TITLE SEARCH t DATE SEARCH t PHOTO SEARCH t PHOTO SCAN
t no indicator
(4) Press . or > to select the date for playback.
Your camcorder automatically starts playback at the beginning of the selected
date.
To stop searching
Press x.
to ON in the MENU settings (p. 72). Factory setting is
49