Table of Contents
Advertisement
Steps
Place the palm-rest and keyboard assembly on a flat and clean surface and perform the post-requisites to install the palm-rest and
keyboard assembly.
NOTE: Install the solid-state drive mounts on slot one and two from the old palm-rest and keyboard assembly into the new
palm-rest and keyboard assembly.
Next steps
1. Install the
power
button.
2. Follow the procedure from step 6 to step 25 in
3. Install the
keyboard-controller
4. Install the
display
assembly.
5. Install the touchpad.
6. Install the
power-adapter
7. Install the speakers.
8. Install the battery.
9. Install the
rear-I/O
cover.
10. Install the
wireless
card.
11. Install the
M.2 2230 solid-state drive
12. Install the
M.2 2230 solid-state drive
13. Install the
memory
module.
14. Install the
base
cover.
15. Follow the procedure in
Installing the system
board.
port.
or
M.2 2280 solid-state drive
or
M.2 2280 solid-state drive
After working inside your
board.
in slot one, whichever applicable.
in slot two, whichever applicable.
computer.
67
Advertisement
Table of Contents
