Steps
1. Connect the ethernet and audio board to the system-board assembly.
2. Align the screw holes on the ethernet and audio board with the screw holes on the system-board assembly.
3. Replace the two screws (M2x4) that secure the ethernet and audio board to the system-board assembly.
4. Turn the system-board assembly over.
Next steps
1. Follow the procedure from step 6 to step 25 in
2. Install the
rear-I/O
cover.
3. Install the
wireless
card.
4. Install the
M.2 2230 solid-state drive
5. Install the
M.2 2230 solid-state drive
6. Install the
memory
module.
7. Install the
base
cover.
8. Follow the procedure in
USB board
Removing the USB board
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
memory
module.
4. Remove the
M.2 2230 solid-state drive
5. Remove the
M.2 2230 solid state drive
6. Remove the
wireless
card.
7. Remove the
rear-I/O
8. Follow the procedure from step 1 to step 20 in
or
M.2 2280 solid-state drive
or
M.2 2280 solid-state drive
After working inside your
Before working inside your
or
M.2 2280 solid-state drive
or
M.2 2280 solid-state drive
cover.
Removing the system
Installing the system
board.
in slot one, whichever applicable.
in slot two, whichever applicable.
computer.
computer.
in slot one, whichever applicable.
in slot two, whichever applicable.
board.
61