Table of Contents
Advertisement
General Guide
Front
Liquid crystal
display (LCD)
Power Keys
Turn power on
and off.
AC adaptor
connector
Replacing the Cover if it Comes Off
If the cover comes off, replace it as shown in the illustra-
tion nearby. Take care to avoid damaging the tabs and
hinges when installing the cover.
Cover release
Tape cartridge compartment
Tape cutter lever
Tape outlet
Print key
Letter keys
3-pin jack
Bottom
Main battery
compartment
Handle
Label Printer Menus
Label printer operation is designed to be as simple as pos-
sible, thanks to on-screen menus that you can use to select
the settings you need. Each menu is described in detail in
the sections that follow in this manual, but note the follow-
ing general points when using them.
• The item that is highlighted in a menu is the one that is
currently selected.
Currently
–
–
–
–
–
–
–
–
S
E
T
U
P
selected item
D
E
F
A
U
L
T
F
O
N
T
I
N
P
U
T
C
O
N
T
R
A
S
T
• Use u and i to move the highlighting up and down and
change the selected item.
• Press SET to execute the highlighted item, or ESC to exit
the displayed menu (and return to the previous menu or
screen) without selecting anything.
• When you press SET to execute a menu item, the label
printer either moves on to the next menu, or it executes
the selected function and returns to the text input screen
that you started from.
Part 2 Getting Ready
This part of the manual tells you how to load and replace
batteries, load the tape cartridge, and perform other basic
setups for the label printer.
Important! Be sure to read this section before attempting
to use the label printer.
Power Supply
The Label Printer can be powered by a specified AC adap-
tor (AD-A12070) or eight AA-size alkaline batteries.
AC Adaptor
Note the following important precautions when using an AC
adaptor to power your label printer.
• Use only specified CASIO AD-A12070 AC adaptor, and
make sure the adaptor has the same voltage rating as
the household current in your area. Using a wrong adap-
tor can damage your label printer.
• Be sure to turn the label printer off before you connect the
adaptor. Do not turn power on until the adaptor is con-
nected to the label printer and plugged into an AC outlet.
E-5
Advertisement
Table of Contents
