Initial Power On Settings
The following are the initial settings of the Label Printer whenever you turn it
power on.
Item
SIZE
AUTO SIZE
EFFECT
STYLE
MIRROR
Initializing the Label Printer
If you experience serious malfunction of the Label Printer or if operation fails
completely, try performing the following operation to initialize the printer.
Important!
• Initializing the Label Printer deletes all memory contents. Make sure you have
a back-up copy of text stored in memory if you need it.
To initialize the Label Printer
1. Turn power off.
2. While holding down the PRINT and ESC keys, press ON/OFF to turn power on.
• This prompt confirms whether or not you want to initialize the Label Printer.
I N I T
3. Release the PRINT, ESC, and ON/OFF keys.
4. Press SET to initialize the Label Printer or ESC to abort the reset operation.
Power On
6mm tape...1 × 1
9mm tape...2 × 2
12mm, 18mm tapes...3 × 3
CANCEL
NORMAL
NORMAL
I
A
L
?
S
E
T
⁄
E S C
• The following table shows the initial settings.
Item
Display
Memory
SYMBOL
SIZE
EFFECT
STYLE
MIRROR
MEMO
DENSITY
Bar Code initial setting
Item
Menu
Text
Size
Bar Code Specifications
Bar code
Check
Print
Type
Digit *1
Digit *2
EAN-13
Yes
13
EAN-8
Yes
8
*1 The check digit is automatically calculated in accordance with input data.
For EAN-13 and EAN-8, the check digit is appended at the end of the printed
digits.
*2 The number of digits printed below a bar code equals the input characters
plus automatically appended characters.
*3 An error message is displayed whenever there are insufficient digits. The
unit will not allow input of too many digits.
Reset
Cleared
Cleared
,
AUTO
CANCEL
NORMAL
NORMAL
STORE
3
Reset
EAN-13
Cleared
M (MEDIUM)
Automatically
Input
Assigned
Digits *3
Number of Digits
Characters
(Check Digit *1)
12
1
Numerals (0 ~ 9)
7
1
Numerals (0 ~ 9)
Input
E-21