Setting The Base - Siemens Hicom cordless EM Operating Instructions Manual

Main menu – functions

Setting the base

If your mobile unit is logged onto more than one base
(DECT systems*), you can set it to a particular base or
"best base" (automatic base changeover).
Setting the base
e.g.
or
Note:
If you set
matically linked to the base with the best reception.
If you are located between two systems and the
mobile unit switches continuously, you should set it to
a particular system.
Activating priority selection
If you have set the mobile unit permanently to a base, you
can also activate
When
e.g.
for 30 seconds after switching it on or leaving the radio
range. If this base is not found, the mobile unit automatically
searches for another base.
* see also Note on page 20
Press the menu key.
Scroll to
and confirm.
If necessary, scroll to the required
base.
Press the display key.
Scroll to
Return to the higher-level display.
– the mobile unit searches for the default base
, the mobile unit is always auto-
.
is activated - indicated by ,
45
or
and confirm.