Auto Feed; To Turn Auto Feed On And Off; To Manually Feed Tape; Print Density - Casio KL-7200 User Manual

Auto Feed

You can turn the Label Printer's auto feed feature on and off. When auto feed is
on, the Label Printer automatically feeds the tape about 19mm at the beginning
and end of each print operation. This creates identical margins on both sides of
your text.
Important!
After you finish printing when using manual feed, be sure to always press
FUNC and then PRINT (FEED) to feed the tape before cutting it. If you don't
you will cut off part of the printed text.

To turn auto feed on and off

1. Press FUNC and then 7 (M-FEED).
NO
2. Press H or J to change the setting shown on the display between YES
(manual feed) and NO (auto feed).
3. When the feed setting is the way you want it, press SET to register it.

To manually feed tape

Press FUNC and then PRINT (FEED) to feed the tape 20mm.

Print Density

The print density setting controls how darkly figures are printed on your tapes.

To adjust the print density

1. Press FUNC and then 8 (DENSITY).
1 2
2. Use H and J to move the underlining to the density setting that you want.
The lightest setting is 1, while the darkest setting is 5. The standard setting is 3.
3. When the density setting is the way you want it, press SET to register it.
Y E S
3 4 5
Part 7 Phrases
A collection of preset English phrases can be recalled quickly and easily when
you need them.
REGISTERED
EXPRESS
AIR MAIL
SMALL PACKET
DO NOT BEND
SECRET
ORIGINAL
CREDIT
PAID
URGENT
CONFIDENTIAL
AIR PARCEL POST
FRAGILE
IMPORTANT
OFFICIAL
DUPLICATE
BANK
FAXED
E-17