Selecting The Transmission Speed (Rs-232C) - Sharp XG-V10XU Operation Manual

Selecting the Transmission Speed (RS-232C)

Projector Remote Control
1, 6
2, 3, 4
5
(GUI) On-screen Display
This menu allows you to adjust the transmission speed
of the RS-232C connection by selecting the baud rate.
(Slide the MOUSE/ADJUSTMENT switch
on the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select "Options (2)".
3 Press ∂/ƒ to select "RS-232C", and then press
©.
1.2.3 4.5.6
4 Press ∂/ƒ to select the desired baud rate.
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
• Make sure that both the projector and computer are set
for the same baud rate. Refer to the computer's operation
manual for instructions for setting the baud rate.
MOUSE ADJ.
E-60