To recall text from memory
Example: To recall the contents of Area 2 while memory contains the following
text.
Area 1: ABCDEFG
Area 2: CASIO
1. While the input screen is on the display, press FUNCTION and then 1
(MEMO).
• Note that text recalled from memory will replace any text currently on the
display.
2. Press L a number of times to change to the
text recall prompt.
3. Press SET.
• If all of the text does not fit on the display, you
can use H and J to scroll it to the left and right.
4. Press L to change to Area 2.
• Use K and L to switch between Area 1 and
Area 2.
5. Press SET to recall the text from the area that
is currently on the display.
• Note that recalling data from memory replaces
anything that is currently on the input display.
Memory text cannot be appended.
To delete text from memory
1. While the input screen is on the display, press FUNCTION and then 1
2. Press L a number of times to change to the
3. Press SET.
• If all of the text does not fit on the display, you
can use H and J to scroll it to the left and right.
CAL?
4. Use K and L to select Area 1 or Area 2 then
ABCD
5. Press SET to delete the text from the area that is currently on the display.
Area 1 text
CASI
Area 2 text
CASI
(MEMO).
text delete prompt.
press SET.
DEL?
ABCD
Area 1 text
OK?
E-17