Sharp AR-M160 Operation Manual page 47

Program
Program name
number
Rotation copy
7
Auto paper select mode
8
Auto tray switching
9
to 15 Auditing mode
10
Erase width
16
adjustment
Layout in 2 IN 1 copy
17
Layout in 4 IN 1 copy
18
Offset of paper output
19
tray
Image rotation in
20
duplex copying
Location of the
21
*2,*3
margin
Margin width
22
Resolution in Auto/Text
23
mode
2
* On models with a dual function board.
3
* On models with automatic two-sided copying.
Setting codes
(factory default setting
appears in bold)
0: OFF
*2
1: ON
0: OFF
1: ON
0: OFF
1: ON
–
1: 0"
2: 1/4"
3: 1/2"
*2
4: 3/4"
5: 1"
1: Pattern 1
*2
2: Pattern 2
1: Pattern 1
2: Pattern 2
*2
3: Pattern 3
4: Pattern 4
0: OFF
1: ON
0: OFF
*3
1: ON
1: Left edge
2: Top edge
1: 0"
2: 1/4"
*2
3: 1/2"
4: 3/4"
5: 1"
1: 300dpi
2: 600dpi
Explanation
• When the auto paper select function is enabled
and there is no paper that is the same size as
the original and loaded in the same orientation,
this function will automatically select paper of
the same size that is loaded in the opposite
orientation, and rotate the image 90 degrees so
that it is copied on the paper in the correct
orientation.
• When the auto ratio select function is operating
and the original and paper are loaded in
opposite orientations, this function rotates the
image so that it is copied on the paper in the
correct orientation.
• This function automatically selects paper that is
the same size as the original placed in the
SPF/RSPF, or the same size as that selected
with the [ORIGINAL SIZE ENTER] key. The
function can be disabled.
• If the paper runs out during printing and there is
paper of the same size and orientation in
another tray, this function automatically
switches to that tray (excluding the bypass
tray). The function can be disabled.
See "Enabling Audit Mode". (p.50)
• Use this setting to set the width of erasure of
shadows that appear around the edges and at
the binding margin when a book or similar
original is copied.
• Use this setting to select the layout pattern
when two original pages are copied onto a
single sheet of paper (see page 34 for the
layout patterns).
• Use this setting to select the layout pattern
when four original pages are copied onto a
single sheet of paper (see page 34 for the
layout patterns).
• When enabled, this function offsets the position
in the paper output tray of interrupt copy jobs,
sets of copies during sort/group copy, and print
jobs when using the printer function.
• When a one-sided vertical (portrait) original is
placed in a horizontal orientation (8-1/2" x 14"
or 11" x 17" size) for two-sided copying, the top
and bottom of the images on the front and back
of the paper will be opposite to each other.
• Use this setting to switch between the margin at
the top edge and the margin at the left edge.
• Use this setting to set the margin width.
• The copy resolution in auto and text mode is
normally 300 dpi. If high-quality copies are
preferred, use this setting to change the
resolution to 600 dpi.
USER SETTINGS
5
45