Shark GI468CN 10 Owner's Manual page 4

Quick Start
First things first, remove any
labels, stickers or tags that may
be attached to your Shark
Rapido™ Electronic Iron.
1
2
3
1 Open the water inlet cover
located on the front of the iron.
2
Holding the iron at a slight
angle; fill the tank with the
filling flask without going over
the "MAX" line. Close the water
inlet cover.
3
Plug in the iron.
4
Choose dry or steam ironing
based on the type of fabric you
are going to iron.
For DRY ironing set the steam
control dial to "0".
TOLL FREE: 1-800-798-7398
®
5
For STEAM ironing set to desired
steam for the type of material to be
ironed.
5 Set the desired fabric/temperature by
pressing the Electronic Temperature
Control on the top of the handle.
6 The temperature indicator light on the
LED Display Panel will flash as the
iron reaches the preset temperature.
7 Allow approximately 2 minutes for the
iron to heat up or cool down to the
new temperature setting. Start ironing!
4
6