10. Never use or rest iron on an 1. To avoid a circuit overload, do not unstable surface. 11. While the iron is hot, never set iron on an unprotected surface - even if it 2. If an extension cord is absolutely is on its heel rest.
Move the variable steam control from "0" to "Max" a few times. • Iron may not be hot enough. Set thermostat to the Water droplets coming "Max" position. Always allow iron sufficient time to...
To select iron temperature, align Before starting to iron delicate fabrics, it is best to first test the temperature selected on dial with temperature of the iron on a hem or an the indicator on the water tank. inside seam. DIRECTIONS...
• Stand the iron upright and insert the plug the temperature control dial to "MIN". into the wall socket to let the iron heat up 3. Unplug the iron from the electrical again. outlet.
The red temperature ready light will illuminate when the auto shut-off system has been reset. Allow time for the iron to re-heat. The red temperature indicator light will go out when the iron is ready for use. Fig. 6 Fig. 7...