Using the Burst of Steam Button
2
4
1
Make sure the water tank is at least 1/2
filled with water.
2
Select the desired fabric and tempera-
ture setting after reading the garment
label.
3
Place the iron on its heel, standing up
on a stable and protected surface so it
can heat up for approximately 2
minutes.
4
Press the steam burst button while
holding the iron horizontally or
vertically. Give an interval of 3
seconds of each burst. Overuse of
steam burst button may cause water
spitting or weak steam performance.
11
TOLL FREE: 1-800-798-7398
Steam burst helps to
remove stubborn wrinkles
and can work both
horizontally and vertically.
5
VERTICAL STEAM
5
The steam burst feature is especially
useful to remove wrinkles from
hanging clothes, delicate garments
and other fabrics. Hold the iron in a
vertical position several inches away
from the articles and press the steam
burst button to prime the pump.
CAUTION: Do not aim iron at yourself
or anyone else while using the steam
burst feature. Be careful, burns or
serious injury may occur.
CAUTION: Never iron or steam
clothes while they are being worn.
If the tank runs dry, always make sure
you unplug the iron from the outlet
before you refill.