Nokia RH-29 Series Manual page 67

Nokia Customer Care
levels may differ from target power levels mentioned in Phoenix.
Press "Save and Continue" and TX Power Level Tuning is finished.
Auto-Tune with Phoenix
Automatic tuning for RH-29 RF parameters is possible. Auto-Tune tunes all RF parame-
ters for both of the bands.
Needed equipment
• PC running Nokia Phoenix SW
• Test jig MJ-21
• Power source
• Cables: RF-cables for measurements and GPIB-cable(s) to control test
equipment
• R&S CMU200
OR one TX- and one RX-equipment and RF-splitter:
TX:
• Agilent E4406 (VSA series transmitter tester)
• Agilent E4445 (PSA series transmitter tester)
• Rohde&Schwarz, FSE-family of Signal Analyzers
• Rohde&Schwarz, FSIQ-family of Signal Analyzers
RX:
• Agilent ESG family of RF Signal Generators
• Rohde&Schwarz, SME-family of Signal Generators
Set Loss
Path losses caused by test jig MJ-21 and RF-cables must be set correctly before tuning.
To be able to change these values, there have to be some phone connected to Phoenix.
Select right connection type from Phoenix and set operating mode to local mode.
Select
Scan Product
Issue 1 05/2004
Company Confidential
File
Copyright © 2004 Nokia Corporation
Company Confidential
Alt-F
P
RH-29
6b - RF Troubleshooting
Page 39