Sanyo PLC - 12BL Owner's Manual page 14

Sanyo multimedia projector owner's manual plc - xf12n, plc - 12nl, plc - xf12e, plc - 12el, plc - xf12b, plc - 12bl
Table of Contents

Advertisement

CONNECTING THE PROJECTOR
CONNECTING TO THE MONITOR OUTPUT TERMINAL (ANALOG HDB 15-PIN)
This terminal output the information of the selected computer source being viewed on the screen (Computer 1 or Computer 2).
When video source ("Video 1" or "Video 2") is selected, this terminal outputs Computer 1 input information.
An external monitor can be connected to the HDB15-pin (VGA) terminal on the projector.
Connect the monitor to this terminal using the VGA cable (not provided).
HDB 15-PIN
TERMINAL
CONNECTING TO THE AUDIO MONITOR OUTPUT (VARIABLE) JACKS
These jacks will contain the audio information of the selected program source being viewed on the screen (Computer 1,
Computer 2, Video 1 or Video 2). If you have selected program source Computer 2 the audio signal connected to the
Computer 2 audio input jack will be available at the audio monitor output jacks.
Use RCA type audio for connection.
If the audio input of the audio equipment is stereo, be sure to connect the right and left channels to the respective right
and left jacks.
If the audio input of the audio equipment is monaural, connect it to the left jack.
CONNECTING TO THE SERIAL PORT (DB 9-PIN) TERMINAL
If you control the projector by computer, you must connect a cable
(not provided) from your computer to this terminal.
CONNECTING TO THE USB PORT CONNECTORS (1 and 2)
This port is used to control the projector with the computer. It is also
used to control the computer with the Remote control of this projector.
(Refer to P49, 50.)
Connect the USB port of the computer to this port.
14
5 4 3 2 1
10 9 8 7 6
15 14 13 12 11
Pin No./Signal
1 Red input
2 Green input
3 Blue input
4 Sense 2
5 Ground (Horiz.sync.)
6 Ground (Red)
7 Ground (Green)
8 Ground (Blue)
SERIAL PORT
DB9-PIN
TERMINAL
5
9
USB PORT
Pin No./Signal
9 Non Connect
10 Ground (Vert. sync.)
11 Sense 0
12 Sense 1
13 Horiz. sync
14 Vert. sync
15 Reserved
––––––––
1
2
R x D
3
T x D
––––––––
4
Ground
5
6
––––––––
4
3
2
1
7
––––––––
8
7
6
––––––––
8
––––––––
9
2
1
Vcc
1
2
- Data
3
4
3
+ Data
4
Ground

Advertisement

Table of Contents
loading

Table of Contents