Table of Contents
Advertisement
Selecting outside the current group of Slots
To select a Slot which is not shown on the display:
1. Use the next and previous arrow-buttons at the
bottom of the screen to browse through the groups of
16.
The labels for next/previous will vary depending on the
current group of Slots, and on the number of Slots being
shown. For instance, if 16 Slots are being shown and the
current group is 0-15, the buttons will show 112-127 and 16-
31, respectively.
As you browse, the current selection does not change until
you actually press one of the Slot buttons.
NOTE: If you've made any edits and then browse outside of
the current Set List, a dialog box will appear offering an
opportunity to save your edits.
2. When the desired group of Slots is displayed, press the
button for the desired Slot.
The button becomes highlighted, and the comments and
large Slot number/name at the top of the screen are updated
accordingly.
Other ways to select Set Lists and Slots
You can also select Set Lists and Slots using the front-panel
Inc/Dec buttons, the VALUE dial, or the numeric keypad, or
step through Slots using the assignable footswitch. For more
information, see "Selecting and playing sounds" in the "Set
Lists" chapter of the OG.
Choosing a sound for a Slot
1. Press the Edit tab to go to the Set List Edit page.
2. Select the Slot that you'd like to edit.
Notice the parameters which appear above the 16 Slot
buttons. These let you set up the current Slot.
3. At the top left of the parameter box, select the desired
Type: Program, Combination, or Song.
Each Slot can play either a Program, a Combination, or a
Song. When you change the Type, the Bank & Number and
Category or Track parameters will update accordingly.
Category appears for Programs and Combinations; Track
appears for Songs.
4. Using either the Bank & Number or Category popup
menus, select the desired Program, Combination, or
Song.
Note that you can use the same sound in multiple Slots
within the same Set List. For instance, you might have a
favorite piano sound which you use in a number of different
songs. You can create any number of Slots which use this
same piano sound, each with different names and comments.
Writing your edits
When you've finished adding sounds, make sure to save
your edits by writing the Set List:
1. Select Write Set List from the page menu.
The Write Set List dialog will appear.
2. If you wish, edit the name by pressing on the "T" text
edit button.
3. Optionally, use the Set List popup menu to write the
Set List into a different number in memory.
4. Press OK to write the Set List, or Cancel to exit
without writing.
For more information on the Write command, see "Saving
your edits" on page 24.
Adding items to the Set List from other
modes
Program, Combination, and Sequencer modes each have an
Add To Set List command in their P0 page menus.
By default, Add To Set List inserts the Program,
Combination, or Song at the current Slot of the current Set
List, similar to using the Set List Edit page's Insert
command. You can also choose a different destination, if you
like.
Playing sounds
17
En-
Advertisement
Table of Contents
