Image Stabilization - Canon EOS R5C Advanced User's Manual

Image Stabilization

You can use the image stabilizer to compensate for camera shake and achieve steadier shots. The image
stabilizer is more effective at wider angles and the effect is reduced the more you approach the telephoto end.
The camera's image stabilization is not available for RAW clips.
v
1 Select > [ Camera Setup] > [Digital IS] > [On].
• Press the button assigned to [Digital IS] to turn this function on and off.
v
2 Select > [ Camera Setup] > [Digital IS Mode] > Desired option.
• (standard) or
3 If the camera cannot obtain the focal length from the lens, select
[Lens Focal Length] and enter the lens's focal length using the data entry screen (A 25).
• The image stabilization is adjusted according to the focal length entered.
4 When using an anamorphic lens, select
Squeeze factor to use to correct the image stabilization.
• If you selected [Lens Squeeze Factor], the anamorphic correction will be applied according to the squeeze
factor specified with the
NOTES NOTES
• If the IS function is turned off on the lens, the camera's image stabilization function is deactivated too and the
icon will flash.
• If you set an assignable button to [Pause Digital IS] (A 121), you can press and hold the button to temporarily
stop the camera's image stabilization (
image stabilization.
• Depending on the subject and shooting conditions, subject blur may be more prominent (the subject may be
momentarily blurred) due to the use of image stabilization.
• Turning off the camera's image stabilization is recommended in the following cases:
- When using TS-E lenses and fisheye lenses
- When the camera is expected to be stable, for example when it is mounted on a tripod
• If the degree of camera shake is too high, the image stabilizer may not be able to compensate fully.
• The camera's image stabilization will not function when using super telephoto lenses with a focal length
exceeding 1000 mm.
(high) will appear on the screen.
> [v Camera Setup] > [Anamorphic Corr.] >
> [Æ Recording/Media Setup] > [Metadata] > [Lens Squeeze] setting.
or will appear grayed out). This will not affect the lens's
Image Stabilization
v
> [ Camera Setup] >
93