Checking the Required Type of Power Source (Power Source Navigation)
Using the power source navigation function you can check the recording settings that are available based on the
lens/accessories attached, current recording configuration (recording format/frame rate) and the power source
used.
Types of power source: Battery pack, PD-E1 USB Power Adapter and DR-E6C DC Coupler.
Checking the Power Source
1 Select
>
[B System Setup] > [Power Source Navigation] > [Check the required power source.].
2 Select the type of lens.
3 Select the recording format and frame rate combination (multiple selection is possible).
• The required power source configuration is displayed.
Checking the Recording Settings
1 Select
>
[B System Setup] > [Power Source Navigation] > [Check the available recording settings.].
2 Select the type of lens.
3 Select the type of power source.
• If you use a commercially available accessory compatible with the multi-function shoe (e.g. the XLR
Microphone Adapter), check the [Power XLR Mic Adapter from Camera] checkbox when supplying power
from the camera.
• The available recording format/frame rate is displayed.
RF/EF Lenses: Available Recording Settings and Power Source Configuration
Other power sources: PD-E1 USB Power Adapter, DR-E6C DC Coupler
Recording
Sensor mode
format
RAW ST
RAW LT
HDMI RAW
Full frame
MP4 (HEVC)
XF-AVC
MP4 (HEVC)
MP4 (H.264)
System frequency/Frame rate
High: 59.94 Hz
Resolution
Medium: 50.00 Hz
Low: 24.00 Hz
31-60
26-60
25-60
1-30
1-25
1-24
8192x4320
29.97, 23.98
25.00
24.00
1-30
1-25
1-24
31-120
4096x2160
26-120
3840x2160
25-120
2048x1080
1-30
1920x1080
1-25
1280x720
1-24
Preparing the Camera
1
Using a battery pack
Power supply to a commercially
available accessory
Yes
No
–
–
Ü
Ü
Ü
Ü
Ü
Ü
3
Ü
Ü
Ü
Ü
29
Other power
sources
Ü
2
Ü
Ü
Ü
Ü
Ü