Whirlpool W10254428A Manual page 9

FOR SERVICE TECHNICIAN'S USE ONLY
FAULT/ERROR CODES (continued) — The fault codes below may be indicated
under various conditions and can be accessed through Service Diagnostics.
Display EXPLANATION AND RECOMMENDED PROCEDURE
F8E1 NO WATER DETECTED ENTERING WASHER OR PRESSURE SWITCH TRIP NOT DETECTED
The washer does not detect water input after 13 minutes of filling.
Possible Causes
T
T
F8E2 DISPENSER SYSTEM ERROR
Possible Causes
T
F8E3 OVERFLOW CONDITION
The overflow condition occurs if there is too much water or foam in the washer and the overflow contact
Possible Causes
Ve
T
T
T
F8E4 FLOW METER FAULT
Possible Causes
T
T
F9E1 LONG DRAIN
off and the drain pump will stop running. Note:
Possible Causes
Ve
T
DO NOT REMOVE OR
13 mm) into drain pipe.
Va
f.
Va
Va
DESTROY
.
han 2 minutes)
.
sher drains for
PAGE 9