Setting Up Your French Door Refrigerator; Getting Ready To Install The Refrigerator - Samsung RF4287HA User Manual

Setting up your French Door Refrigerator

gEtting READy to inStALL tHE REFRigERAtoR

Congratulations on your purchase of the Samsung French Door Refrigerator.
We hope you enjoy the state-of-art features and efficiencies that this new appliance offers.
Selecting the best location for the refrigerator
• A location with easy access to the water supply.
• A location without direct exposure to sunlight.
• A location with a leveled floor.
• A location with enough space for the refrigerator doors to open easily.
• Allow sufficient space for air circulation of the internal cooling system.
If the refrigerator does not have enough space, the internal cooling system may not
work properly.
If your refrigerator has an ice maker, allow extra space at the back for the water line
connections.
When you install the refrigerator next to a fixed wall, minimum clearance is 3 ¾" (95mm) between the refrigerator
and wall to allow the door to swing open.
First thing! Make sure that you can easily move your refrigerator to its final location by measuring doorways (both
width and height), thresholds, ceilings, stairways, etc.
The following chart details the exact height and depth of Samsung French Door
Refrigerator.
Model Depth "A"
33.78"
RF4287HA
(85.8 cm)
• Allow clearance to the right, left, back and top when installing.
This will help reduce power consumption and keep your energy bills lower.
• Do not install the refrigerator where the temperature will go below 50ºF
(10ºC).
• Do not locate the refrigerator where it may become wet.
When moving your refrigerator
To prevent floor damage, be sure the front adjusting legs
are in the up position(above the floor).
cAution
Refer to 'Adjusting the doors' in the manual (on page 19).
FLooRing
For proper installation, this refrigerator must be placed on a leveled
surface of hard material that is the same height as the rest of the
flooring. This surface should be strong enough to support a fully
loaded refrigerator, or approximately 359lbs (165kg). To protect the
finish of the flooring, cut a large section of the cardboard carton and
place under the refrigerator where you are working. When moving
a refrigerator, it is needed to pull and push in the back-and-forth
direction.
08_ setting up
width "B" Height "c"
35.75" 66.19"
(90.8 cm) (168 cm)
overall
Depth "E"
Height "D"
69.88" 36.22"
177.4 cm (92 cm)
Flat-blade
screw driver(-)
2 inches
3 inches
3/4
2 inches
B B
A A
E E
C C
control Lever
D D