Setting up your French Door Refrigerator
REATTACHING THE REFRIGERATOR DOORS
4. Connect the water line (
clip on the coupler with pulling tube.
Connect the one connector(
door and two connectors (
of the top cap.
The clip is enveloped inside of the top cap.
5
Dispenser
Door Tube
The water line (
5
CAUTION
water leakage from the dispenser.
Be sure to sensor (yellow cable) is inside the top table.
5. Position the Top Table(
With a Philips head screwdriver, insert and tighten the 3
screws into the Top Table. With the door opened, reinsert the
Top Table cap(
) and close the doors.
When reattaching the top table, make sure that the
wires are not pressed or damaged by the top table.
14_Setting Up
) and then insert a
5
) on left side
4
) at each side
3
Cabinet
Tube
Red Clip
) must be fully inserted to the marked line to prevent
) in place.
2
3
4
(1/4")
3
coupler
2