Table of Contents
Advertisement
2-10 Connecting an A/V device with an audio/video cable
1. Connect [VIDEO IN(yellow)] input port of the projector to the VIDEO (yellow) OUT
cable.
Connect the [L-AUDIO-R] input port of the projector to the Audio (L), Audio (R) output ports of the external device, such as a
DVD, VCR or camcorder using an audio cable.
2. When the connections are all completed, connect
Using the Projector
Turn on the projector, press the [SOURCE] button to select the external device (DVD, VCR or camcorder) that is connected.
1.
2. If the corresponding mode is not selected, check whether the video cable is connected correctly.
•
Check that the projector and the video equipment are turned off before connecting cables.
•
The <Video> mode brightness is lower than <PC> and <MEDIA PLAY> mode.
Installation and Connection
both power cords
of the projector and the DVD, VCR, or camcorder.
port of the video
equipment
using a video
2-10
Advertisement
Table of Contents
