For internal use only
1 Introduction
This service manual refers to HiPath HG 1500 V 1.0/V 2.0 as well as Hicom Xpress
@LAN V1.1 with the LAN boards HXGS and HXGM.
HiPath HG 1500 supports the standard functions of ISDN (IP/IPX) routers together
with the additional functionality of a voice gateway (H.323). A virtual CAPI interface
(vCAPI) and a TAPI interface (CSTA) are also provided. The system also facilitates
PC-supported telephony (CTI) and HiPath HG 1500 administration via a LAN PC.
Caution
7
All safety instructions for service and technical personnel given in the "Important In-
formation" section of the Hicom 150 E Office/Hicom 150 H Service Manual are also
applicable to HiPath HG 1500 and must be observed.
Only authorized staff should work on the system.
Note
Note that when configuring voice applications, only S30810-Q2930/Q2940-X
(HXGM/HXGM2) and S30810-Q2931/Q2939-X (HXGS/HXGS2) boards may be
used.
1.1 HiPath HG 1500
Hicom Xpress @LAN and HiPath HG 1500 create a bridge between the LAN and the
ISDN network via an integrated HXGS/HXGM board
Suitable for:
Hicom 150 E Office Version 2.2 and later or Hicom 150 H V 1.0 or later, Office-
●
Point/OfficeCom/OfficePro model
The following implementation scenarios are possible:
Voice gateway between LAN (H.323) and standard telephones (e.g. Netmeet-
●
ing),
Telephoning from the PC (voice over IP) with Optiset features at the PC or via the
●
Xpress client,
WAN connections via the ISDN network, including PPP Multilink,
●
Remote access from within company LANs (provided via analog V34, GSM V110
●
and ISDN),
Internet access (PPP router, NAT),
●
A31003-K5020-S100-6-7620
Service Manual
lan2de.c01
Introduction
1-1