Siemens MOBILETT Plus Installation Instructions Manual page 35
Hide thumbs
Also See for MOBILETT Plus:
- Service instructions manual (114 pages) ,
- Maintenance instructions manual (64 pages) ,
- Manual (58 pages)
Table of Contents
Advertisement
Installation
12.
The end of the cable with pin plug K23 is placed as shown in Fig. 37. The cable
runs on top of the protective cover over board D8 (pos. 1 / Fig. 37) along with the
other cables.
13.
Fasten the end with a cable tie (2.5x100mm) to one of the cables already present
(see pos. 1 / Fig. 38). Leave about 7 cm hanging.
Siemens AG
Medical Solutions
D8
Fig. 37 Cable from power supply
D8
Fig. 38 Fastening of cable
SPR8-220.031.04
Rev. 04
1
1
approx. 7 cm
Page 27 of 30
09.03
CS PS 24
2 - 27
MOBILETT Plus/ -E/ -HP
Advertisement
Table of Contents
