Simple Stand; Kensington Lock - Samsung SyncMaster 940BW Owner's Manual

AUTO button
Power button [ ]/
Power indicator
See PowerSaver
functions. For energy conservation, turn your monitor OFF when it is not needed, or when
leaving it unattended for long periods.
Rear

Simple stand

(The configuration at the back of the monitor may vary from product to product.)
POWER port
DVI IN port
RGB IN port

Kensington Lock

ON [ | ] / OFF [O]
See Connecting the Monitor
to the graphic card's DVI port or DVD player's DVI Port using the
DVI cable or DVD player's HDMI port using the DVI to HDMI cable.
Use this button for auto adjustment.
Use this button for turn the monitor on and off. /
This light glows blue during normal operation, and blinks blue once
as the monitor saves your adjustments.
described in the manual for further information regarding power saving
Connect the power cord for your monitor to the power port on the back
of the monitor.
Connect the DVI Cable to the DVI port on the back of your monitor.
Connect the signal cable to the 15-pin, D-sub port on the back of your
monitor.
The Kensington lock is a device used to physically fix the system
when using it in a public place. (The locking device has to be
purchased separately. )
For using a locking device, contact where you purchase it.
Switch the monitor on and off.
for further information regarding cable connections.
Sliding Stand