Midi Settings - Casio Keyboard CDP-200R User Manual

5.
Configure the music software settings to select
one of the following as the MIDI device.
CASIO USB-MIDI : (For Windows Vista, Mac OS X)
USB Audio Device : (For Windows XP)
• For information about how to select the MIDI device,
see the user documentation that comes with the music
software you are using.
• Be sure to turn on the piano first before starting up
your computer's music software.
• Once you are able to connect successfully, there is no
problem with leaving the USB cable connected when you
turn off your computer and/or Digital Piano.
• This Digital Piano conforms to General MIDI Level 1 (GM).
• For detailed specifications and connections that apply to
MIDI data send and receive by this Digital Piano, see the
latest support information provided by the website at the
following URL.
http://world.casio.com/
B
Connecting External Devices

MIDI Settings

Keyboard Channel
A keyboard channel is the channel used for sending Digital
Piano data to a computer. You can select the channel you
want for sending Digital Piano data to a computer.
• The keyboard channel setting range is 01 to 16.
1.
7
Press and then use the
and [6] (i) keys to display "MIDI" (page E-6).
M I D I
2.
cl
Press (10-key) [7] (ENTER) key.
K e
3.
cl
Use the (10-key) [–] and [+] keys to change
the keyboard channel.
Navigate Channels
The navigate channels can be used to display only the notes
of a particular channel (part) as on-screen guide information
from among the note information of a tune sent from the
computer.
■ Specifying the Navigate Channels
From among the 16 available channels (numbered 1 to 16),
you can specify any two neighboring channels (such as 05
and 06) as navigate channels. The smaller numbered channel
is the navigate (L) channel, while the larger numbered
channel is the navigate (R) channel. Specifying the navigate
(R) channel will automatically configure the navigate (L)
channel as well.
1.
7
Press and then use the
and [6] (i) keys to display "MIDI" (page E-6).
2.
cl
Press (10-key) [7] (ENTER) key.
3.
cl
Use the (10-key) [4] (u) and [6] (i) keys to
display "Navi. Ch".
N a v i . C h
4.
cl
Use the (10-key) to specify the navigate (R)
channel.
This also will automatically configure the next lower
channel number as the navigate (L) channel.
cl
(10-key) [4] (u)
Flashes
b d C h
y
cl
(10-key) [4] (u)
E-63